Minimum Order Quantity | 1 Kilogram |
Shape | Rectangle |
Color | Silver |
Thickness | 1-45 mm |
Material | Aluminium Alloy |
Usage | Construction |
Chemistry Data:
Aluminum | Balance |
Chromium | 0.1 max |
Copper | 3.9 - 5 |
Iron | 0.7 max |
Magnesium | 0.2 - 0.8 |
Manganese | 0.4 - 1.2 |
Remainder Each | 0.05 max |
Remainder Total | 0.15 max |
Silicon | 0.5 - 1.2 |
Titanium | 0.15 max |
Titanium Zinc | 0.2 max |
Zinc | 0.25 max |
Shape | Round |
Diameter | 1-150 mm |
Surface Treatment | Polished |
Usage/Application | Construction |
Material | Aluminum Alloy |
Minimum Order Quantity | 1 Kg |
Material Grade | 7075 |
Single Piece Length | 6 meter, 3.66 Mrt / 12 Ft Or Anty Custom Length as per Requirement, 3 meter |
Shape | Round, Square, Rectangular, Blocks, Circle, Cut Pcs |
Usage | Construction, Manufacturing |
Weight | As Per 2.81g/cm3 |
Is It Anodised | Not Anodised |
Dimensions | 10 MM To 750 MM Dia |
Operating Temp. | 477 DegreeC (891 DegreeF) |
Temper | O, T6, T651, T6511, T3, T351, T73, T7351 |
Yield Strength | T6, T651 - 503MPA & T7, T73, T7351 - 434MAP |
Elongation | T6, T651 - 11% & T7, T73, T7351 - 13% |
Certification Of Conformity Coc | With Material |
I Deal In | New Only |
Brand | Hindalco, Jindal, , Alocoa, Kumz, Rusal, Imported (Chinese, USA, Russian, European and Other) |
Stress Proof | Yes |
Length | 12 Ft long or any cutting length upto 12 ft, Or AS per Customer Order |
Thermal conductivity (k) | 196 W/m*K |
Ultimate Tensile | T6, T651 - 572MPA & T7, T73, T7351 - 403MPA |
Hardness | 150 |
Aluminum Alloy 7075 is an aluminum alloy, with zinc as the primary alloying element. It is strong, with a strength comparable to many steels, and has good fatigue strength and average machinability. It has lower resistance to corrosion than many other Al alloys, but has significantly better corrosion resistance than the 2000 alloys. Its relatively high cost limits its use to applications where cheaper alloys are not suitable.
The most important benefit of 7075 aluminum is its high strength. While it does not have the same level of corrosion resistance or weldability that other common alloys due, its resistance to stress and strain makes it highly useful in aerospace applications where it allows for weight savings over steel. This alloy features high strength, with average corrosion resistance, poor weldability and workability. It is also fairly machinable.
Due to its high strength, it is often used in applications where it will come under high stress such as aircraft wing spar and ground support equipment.
Usage And Application
Chemical Composition -
Copper (Cu) |
Magnesium (Mg.) |
Silicon (Si.) |
Iron (Fe.) |
Manganese (Mn) |
Zinc (Zn) |
Chromium (Cr) |
Titanium (Ti) |
*Others |
Aluminum (Al) |
|||||
(AA) |
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
Max. |
Min. |
Max. |
|
|
|
(Total) |
|
7075 |
1.2 |
2.0 |
2.1 |
2.9 |
- |
0.4 |
0.5 |
- |
0.3 |
(5.1 -6.1)% |
(0.18-0.28)% |
Max - 0.2% |
0.2 |
Remainder, |
*Your information is safe with us.
Minimum Order Quantity | 1 Kilogram |
Tempered | T6, T651, T351 |
Shape | Round |
Surface Finish | Polished |
Color | Silver |
Material | Aluminum |
Length | 12 ft |
Aluminium alloy 2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance. It is weldable only through friction welding, and has average machinability. Due to poor corrosion resistance, it is often clad with aluminium or Al-1Zn for protection, although this may reduce the fatigue strength. In older systems of terminology, this alloy was named 24ST.
2024 is commonly extruded, and also available in alclad sheet and plate forms. It is not commonly forged (the related 2014 aluminium alloy is, though)
Minimum Order Quantity | 5 Kilogram |
Brand | Hindalgo,Jindal,Imp |
Material | Aluminum |
Application Use | Structure,Patts,Engg Works |
Grade | Commercial, 6061, 6082, 6063, 2014, 2024, 7075, HE9, HE30, HE20, HE15 |
Length | 1/2"FT TO 11FT |
Application | Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations |
Color | Silver |
Shape | Round |
Usage/Application | Construction |
Material | Aluminum |
Grade | 2011-T6, 2014-T6, 6026-T9, 7075-T6 |
Length | Upto 12 ft |
We hold expertise in offering a wide array of Aluminum Round Bar to our customers. These Aluminum Round Bar are widely used for chemical industry applications. Available with us at standard market prices, these plates are known for their advanced attributes such as corrosion resistant, tensile strength, and heat resistant.
Features:
Used in manufacturing of:
*Your information is safe with us.
Minimum Order Quantity | 5 Kilogram |
Color | Silver |
Shape | Round |
Usage/Application | Construction |
Material | Aluminum |
Grade | Commercial, 6061, 6082, 6063, 2014, 2024, 7075, HE9, HE30, HE20, HE15 |
Length | 12 ft |
Minimum Order Quantity | 5 Kilogram |
Shape | Round |
Color | Silver |
Diameter | 1-140 mm |
Material | Aluminum |
Thickness | 6 mm to 75mm |
INDIAN |
| USA | Copper | Magnesium | Silicon | Iron | Manganese | *Others | Remarks | |||||
OLD | NEW |
| (AA) | Min. | Max. | Min. | Max. | Min. | Max. | Max. | Max. | Max. | (Total) |
|
H 20 | 65032 | # | - | 0.15 | 0.4 | 0.7 | 1.2 | 0.4 | 0.8 | 0.7 | 0.2 | 0.8 | 0.4 | **Cr O.15-0.35% |
- | - |
| 6061 | 0.15 | 0.4 | 0.8 | 1.2 | 0.4 | 0.8 | 0.7 |
| 0.15 | 0.4 | Cr 0.04 to 0.35% |
Minimum Order Quantity | 1 Kg |
Shape | Round |
Material | Aluminum |
Color | Silver |
Grade | 7075 T6,7075 T651,7075 T351 |
Lenght | 12 ft |
Al | 87.1 - 91.4 |
Cr | 0.18 - 0.28 |
Cu | 1.2 - 2 |
Fe | Max 0.5 |
Mg | 2.1 - 2.9 |
Mn | Max 0.3 |
Other, each | Max 0.05 |
Other, total | Max 0.15 |
Si | Max 0.4 |
Ti | Max 0.2 |
Zn | 5.1 - 6.1 |
*Your information is safe with us.
Minimum Order Quantity | 5 Piece |
Material Grade | HE30,HE9,HE20,Commercial |
Shape | Round |
Color | Silver |
Brand | Jindal,Imp,Hindalco |
Usage/Application | Defance,Aotopart,Aerospace |
Material | Aluminum |
Lenght | 6 ft |
Minimum Order Quantity | 1 Kilogram |
Brand | Jindal ,Imp,Hindalco |
Shape | Round |
Color | Silver |
Usage/Application | Defiance,Aotopart,aerospace |
Material | Aluminum |
Usage | Industrial |
We are remarkable enterprise, instrument in offering superior quality Aluminium RODS.
Features:
Minimum Order Quantity | 5 Kilogram |
Shape | Round |
Color | Silver |
Application | Automation,shipping |
Material | Aluminum |
Length | 6 ft |
*Your information is safe with us.
Minimum Order Quantity | 5 Kilogram |
Grade | HE9,HE30,HE20,6061,7075 |
Shape | Round,Square |
Diameter (mm) | 3 mm to 12 Inch |
Usage/Application | Defance,aotopart,aerospace |
Material | Aluminum |
Grades | Commercial, 6061, 6082, 6063, 2014, 2024, 7075, HE9, HE30, HE20, HE15 |
Length | 12 Ft |
Minimum Order Quantity | 1 Kg |
Brand | Jindal, Hindalco Imported |
Type | Rod, Round, Cut Pcs |
Grade | 2014, HE15, 24345 |
Tempered | T6,T651,T351 |
Shape | Round |
Color | Silver |
Material | Aluminum |
Length | 12 ft |
2014 aluminium alloy is an aluminium-based alloy often Majorly used in the aerospace industry.
It is easily machined in certain tempers, and among the strongest available aluminium alloys, as well as having high hardness. However, it is difficult to weld, as it is subject to cracking.
2014 is the second most popular of the 2000-series aluminum alloys, after 2024 aluminum alloy. It is commonly extruded and forged. The corrosion resistance of this alloy is particularly poor. To combat this, it is often clad with pure aluminum. If unclad 2014 aluminum is to be exposed to the elements, it should be painted as a corrosion protection measure.
Minimum Order Quantity | 5 Kg |
Shape | Square |
Size | 0.375" to 6" |
Material | Aluminum |
Thickness | 0.1875" to 4.5" |
Width | Up to 6" |
Diameter | 0.1875" to 12.125" |
*Your information is safe with us.
Minimum Order Quantity | 1 Kilogram |
Material | Aluminum |
Usage/Application | Defance,Areospace |
Thickness | 1/2"to 10" |
Tensile Strength | 42,000 psi (290 MPa) |
Usage | Heavy Duty Building Hardware For Bus Body,Rivets etc |
INDIAN |
| USA | Copper | Magnesium | Silicon | Iron | Manganese | *Others | Remarks | |||||
OLD | NEW |
| (AA) | Min. | Max. | Min. | Max. | Min. | Max. | Max. | Max. | Max. | (Total) |
|
H 20 | 65032 | # | - | 0.15 | 0.4 | 0.7 | 1.2 | 0.4 | 0.8 | 0.7 | 0.2 | 0.8 | 0.4 | **Cr O.15-0.35% |
- | - |
| 6061 | 0.15 | 0.4 | 0.8 | 1.2 | 0.4 | 0.8 | 0.7 |
| 0.15 | 0.4 | Cr 0.04 to 0.35% |
Minimum Order Quantity | 1 Kilogram |
Shape | Rectangular |
Color | Silver |
Material | Aluminum |
Grade | HE20, 65032 |
Thickness | 1 mm - 400 mm |
Owing to our excellent working force, we bring forth for our clients an exclusively manufactured range of 6061 Aluminum Flat. To provide our customers high quality products, these plates are manufactured from sophisticated machinery and advanced technology. As per the specifications provided by our customers, these bars can be custom designed.
Features:
Indian |
| USA | Copper | Magnesium | Silicon | Iron | Manganese | *Others | Remarks | |||||
Old | New |
| (AA) | Min. | Max. | Min. | Max. | Min. | Max. | Max. | Max. | Max. | (Total) |
|
H 20 | 65032 | # | - | 0.15 | 0.4 | 0.7 | 1.2 | 0.4 | 0.8 | 0.7 | 0.2 | 0.8 | 0.4 | **Cr O.15-0.35% |
- | - |
| 6061 | 0.15 | 0.4 | 0.8 | 1.21 | 0.41 | 0.8 | 0.7 |
| 0.15 | 0.4 | Cr 0.04 to 0.35% |
Minimum Order Quantity | 5 Kilogram |
Color | Silver |
Size | 1/2" TO 10" |
Material | Aluminum |
Thickness | 1 mm to 50 mm |
Length | Up to 12 feet |